Attaching The Accessories; Filling The Water Reservoir; Turning On The Appliance - Kärcher SC 2.500 C Manual De Instrucciones

Attaching the Accessories

Illustrations see page 24
Illustration

Insert steering roller and transport
wheels and lock them.
Illustration

Connect the required accessories
(see Chapter "How to use the ac-
cessories") to the steam gun. Insert
the open end of the accessory on
the steam gun and push onto the
steam gun until the unlocking but-
ton of the steam gun locks into
place.
Illustration

Use the extension tubes if neces-
sary. To do so, connect one or both
extension tubes to the steam gun.
Insert the required accessories on
the free end of the extension tube.
Removing the Accessories
Danger
Hot water may drip out of the ac-
cessory parts while you are de-
taching them! Never detach ac-
cessory parts while steam
streams out - risk of scalding!
Move the selector switch for the

steam volume back (steam lever
locked).
Illustration

To detach the accessory parts,
press the unlocking button and pull
the items apart.
+

Filling the Water Reservoir

The water reservoir may be refilled at
any time.
Caution
Do not use condensation water
from the drier!
Do not fill with detergent or other
additives (for example fragrances)!
Do not use pure distilled water!
Max. 50% distilled water and
50% tap water.
Do not use collected rain water!
Illustration

You can remove the water reservoir to
fill it or you can fill it directly on the ap-
pliance.
Take off water reservoir
Pull the water reservoir straight up.

 Fill the water reservoir up to the "MAX"
marking while positioned vertically un-
der the water tap.
Insert the water reservoir and press

downwards until it arrests.
Directly on the appliance
Pour water from a container into the

funnel inlet. Fill up to the "MAX" mark-
ing.

Turning on the Appliance

 Place the unit securely on a firm surface.
Insert the mains plug into a socket.

Press the ON switch to turn on the

appliance.
Note:
If there is no or not enough water in the
steam boiler, the water pump starts
and supplies water from the reservoir
into the steam boiler. The filling pro-
cess may take several minutes.
Wait until the indicator lamp (heat-

er) lights up permanently.
The steam cleaner is ready to use.
English 25