Publicidad
Idiomas disponibles
Idiomas disponibles
MENU OVERVIEW
1.
Switch on your eRanger LRF by pressing the power/measurement/scan button
ly in the mode you last used.
2. By pressing the menu button
you can navigate through the different modes.
Measure
On switching
Hold
Hold for 3 seconds
Display
Measurement
Angle/com-
brightness
memory
pass unit
Switch
Switch
Switch
Brightness
Last measurement 1
Angle (m/°)
1 – 6
Compass (°)
Last measurement 2
Last measurement 3
24
. You are now automatical-
Scan mode
Feature
Unit of
Bluetooth
®
modes
measurement
Switch
Switch
Switch
Umbrella/ bunny/
On/off
meter
mountains/
yard
artillery stroke
Default (no icon)
Saving the setting in the menu:
To save your menu changes, you must press the Menu button
3 seconds to exit the menu.
Measuring range and measuring accuracy:
The measuring range of the eRanger LRF is between 15 m / 16.5 yds and 3000 m / 3280.84 yds.
The measuring range depends on factors such as weather, visibility and reflection properties of the respective
target:
Under optimal conditions, the following parameters apply:
Range:
Compass
Color of the object:
unit
Angle to the object:
Object size:
Switch
Atmospheric
Degree
conditions:
Object structure:
again. Then hold the menu key
± 1,0 m/yds to 300 m/328 yds,
± 2,0 m/yds to 600 m/656 yds,
± 0,5 % over 600 m/656 yds
higher
lower
The display shows "End" when:
white
black
perpendicular
pointed
- The distance is less than 15 meters
large
small
(in feature mode
- The distance is over 3,000 meters
clear
hazy
- The reflection properties are too low
e.g. house wall
e.g. bush, tree
EN
pressed for
less than 30 m)
25
Publicidad
