Descargar Imprimir esta página

Energizer Solar Peak 300 Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

ENERGIZER SOLAR PEAK 300
Parameters
Input Charging
AC Charging Power
PV Charging Input
Car Charging Input
AC+PV Charging Power
Battery
Cell Type
Life Cycle
Protection Type
Operating Temperature
Optimum Operating Temperature
Discharge Ambient Temperature
Charge Ambient Temperature
Storage Ambient Temperature
*Whether the product can be charged or discharged is subject to the actual battery pack temperature.
Safety Guidelines
Warning
1.
Do not let a working power station be close to a heat source, such as a fire or a heater.
2.
Do not let the power station come into contact with any liquid.
3.
Do not use the power station in a strong electrostatic or strong magnetic field environment.
4.
Do not disassemble the power station in any way or pierce it with a sharp object.
5.
Do not use wires or other metal objects to short-circuit the product.
6.
Avoid stepping, sitting or climbing on the power station.
7.
Do not use parts or accessories that are not officially supplied. If a replacement is required, please contact
Energizer Solar at www.energizersolar.com.
8.
When using the power station, please follow the temperature guidelines outlined in this user manual. Excessively
high temperatures can lead to a risk of battery ignition, while excessively low temperatures will significantly
compromise the power station's performance and may affect its normal operation.
9.
Do not place heavy objects on top of the power station.
10.
Do not forcibly stop the fan or expose the power station to unventilated or dusty environments while it's operating.
11.
Please avoid dropping and violent vibration. If severe impact happens, shut down the power station immediately.
Please secure the power station during transportation to avoid vibration and impact.
12.
If the power station accidentally falls into water, place it in a safe and spacious area, and maintain a safe distance
until its completely dry. Even after the product has dried do not attempt to use the product again. Dispose of
it properly according to the discard section in this user manual. If the power station is on fire, please use the
recommended fire extinguishing methods in the following order: water or water mist, sand, fire blanket, dry powder,
dioxide carbon fire extinguisher.
250W Max.
120W Max.
96W Max.
250W Max.
Lithium Iron Phosphate Battery (LiFePO
3,000 cycles
Over temperature protection, low temperature protection, over
discharge protection, over charge protection, over load protection,
short circuit protection, over current protection
20°C ~ 30°C (68°F ~ 86°F)
-20°C ~ 45°C (-4°F ~ 113°F)
0°C ~ 45°C (32°F ~ 113°F)
-20°C ~ 45°C (-4°F ~ 113°F)
4
ENGLISH
)
4

Publicidad

loading