Publicidad
Idiomas disponibles
Idiomas disponibles
or
Pairing
1. Turn on speaker and switch to Bluetooth mode by pressing the Bluetooth button on the remote control or press the master
volume control on the active satellite speaker until Bluetooth icon comes on.
2. Go to setup on your source devices (mobile phones, tablets, etc.) and search for nearby Bluetooth devices, you will find
"EDIFIER S350DB" in the list.
3. Pair your device with "EDIFIER S350DB".
4. Play audio tracks on your device and adjust the volume to a desired level.
5. To disconnect Bluetooth, press and hold the Bluetooth button on the remote control.
Note:
1. Bluetooth on the product can be searched and connected only when speaker is ON and switch to the Bluetooth input. When
the speaker is switch to other audio inputs, the Bluetooth connection will be disconnected. When switched to Bluetooth input,
the speaker will try to connect the last connected Bluetooth source device.
2. Bluetooth connectivity and compatibility may be different among different source devices, depending on the software version
of source devices.
3. To enjoy the full Bluetooth functions of this product, please ensure your mobile device supports A2DP and AVRCP profile.
4. PIN code for connection is "0000" if needed.
5. The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality,
therefore please use the device supporting Qualcomm® aptX™ as the audio source.
EDIFIER S350DB
Bluetooth Input
9
English
Publicidad
