Publicidad
Idiomas disponibles
Idiomas disponibles
6.3 BABY UNIT OVERVIEW:
7. KEY OPERATION
7.1 TURN ON/OFF
Press and hold the power
7.2 UP ▲ KEY
Press once to tilt the camera up by one step. Press and hold to tilt continuously.
7.3 DOWN ▼ KEY
Press once to tilt the camera down by one step. Press and hold to tilt continuously.
◀
7.4 LEFT
KEY
Press once to pan the camera left by one step. Press and hold to pan continuously.
▶
7.5 RIGHT
KEY
Press once to pan the camera right by one step. Press and hold to pan continuously.
7.6 CAMERA VIEW/SCAN
Press scan
key to view/scan camera; during scan mode, the scan icon
displayed on the top of screen. Each camera's video will be displayed on the LCD around 10
seconds then change to next camera.
7.7 DIGITAL ZOOM
Under full screen mode, press and hold the
7.8 TWO WAY TALK
Under full screen mode, Press and hold
icon
will be displayed in the corner of the LCD screen. Release the key to stop.
Note: When you are in the two-way talk mode, the parent unit speaker is muted.
8. MENU OPERATION
8.1 PAIRING THE CAMERA AND PARENT UNITS
The baby unit is pre-registered to your parent unit. You do not need to register it again unless
the baby unit loses its link with the parent unit. To re-register your baby unit, or register a
new baby unit, follow the procedure below:
Camera icon with "
Note :
camera icon without "
MIC
Light Sensor
Infrared LEDs
Lens
Power LED
key for 3 seconds to turn on / off the parents unit.
key to enter two way talk mode. A microphone
"means it is well registered. You should select and pair with the
" sign.
35
Antenna
Speaker
Pair Key
DC-Jack
Temperature
Sensor
key around 2 seconds to operate zoom in/out.
will be
1
Publicidad
