Publicidad
Idiomas disponibles
Idiomas disponibles
a qualified electrician. Do not attempt to force the plug into an improper outlet.
• In the event of an unusual circumstance such as immersion, the protective device will
not allow the dryer to operate. Periodically check the safety plug to verify it is in proper
working order.
• Plug the appliance in an electrical outlet and press the test button. The device should
stop immediately. To resume operation, press the reset button.
4. STYLING TIPS
• For faster results, dry your hair with a towel to remove excess of water, then run a comb
through damp hair to detangle for best results.
• Plug the appliance into an electrical outlet and adjust the switch to the selected setting.
Use the LOW setting on fine or thin hair and the HIGH setting on thick and coarse hair.
Use the COOL setting to lock in the style.
• Separate hair into manageable sections.
FOR VOLUMINOUS BLOWOUTS
• Use the volumizer attachment, place the dryer close to the roots and brush down toward
the ends. The mixed nylon-pin with rounded tips quickly detangle, while the bristles and
activated charcoal gently grip hair to smooth and promote shine.
• For extra lift at the roots, hold the dryer for 2 to 3 seconds under the roots.
• To curl ends IN, place the dryer UNDER the ends and hold or 2 to 3 seconds before
rotating inward. To curl ends OUT, place the dryer OVER the ends and hold for 2 to 3
seconds before rotating outward.
• When drying is complete, use the cool function to set the style.
• Wait for the dryer to cool before removing the attachments and storing. Do not wrap
the cord around the dryer.
CLEANING INSTRUCTIONS
• If cleaning becomes necessary, unplug the appliance from the power source and wipe
the exterior with a damp cloth. Dust and lint can be removed from air intake openings
with a small brush or vacuum cleaner brush attachment.
• DO NOT wash in water or allow moisture or additional debris to enter the unit while
cleaning.
CHANGING THE BRUSH ATTACHMENTS
• To change a brush attachment, turn the styler off, unplug the appliance and allow it to
fully cool.
Publicidad
