MBV MAS-100 Atmos Guia De Inicio Rapido página 2

ENGLISH
Dear customer,
Congratulations on your new MAS-100 Atmos® (Article number: 130.4469/ 11732800001).
This quick start guide explains the basics of operating your new instrument - for safe and
easy microbial testing of technical and medical gases.
GENERAL INFORMATION
SAFETY SHEET
Carefully read the printout with all safety instructions.
USER MANUAL
To download the full user manual (English only) please visit
pert-center/downloads/atmos.
CONTACTS
Manufacturer
MBV AG
www.mbv.ch/service
+41 44 928 30 90
service@mbv.ch
TECHNICAL SPECIFICATIONS
Power supply: Input: 100-240V, 1A max, 50-60 Hz (+/- 5%); Output: 5V, 2.1A, 10.5W
Li-ion battery: 10Ah, 7.2V
A complete list of all specifications see user manual chapter
FIRST STEPS
LOCAL USER INTERFACE
CHARGING
– Connect the instrument via USB-C to the power supply
– Check if the integrated LED of the power button is flashing in blue with display switched
off or if the flash icon is shown in the upper left corner with display switched on
– Charge until battery is full (continuous blue LED or full battery icon shown)
Local service center outside Switzerland
Merck KGaA, Darmstadt, Germany and/or its affiliates
www.sigmaaldrich.com/support/customer-support
https://www.mbv.ch/en/ex-
9 «Technical Specifications».
STATUS FRAME COLOR
– Yellow: system under
pressure
– Blue: sampling ongo-
ing
– Red: system error
Page 2 of 20