Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Fill the tank using a measuring cup (not supplied) or directly under the tap, whilst taking
care not to exceed the MAX level (1.8 L).
•
Next, correctly reposition the tank in the station. Remember to always fill the tank before
each use.
•
During use, should you need to top up the tank, you must first remember to switch off the
station by pressing the power button once. Remove the water tank by grasping its handle,
then fill the tank via a measuring cup. Correctly reposition the tank in the station. Press
the power button once to restart the station.
•
Your unit is equipped with an empty water tank detection system. The indicator light
will switch on and the unit will emit 2 beeps whenever there is not enough water in the
tank. Furthermore, the steam function will automatically switch off. It is of the utmost
importance to never fill the water tank past the indicated MAX level.
Note: Your unit has been designed to work with tap water. If your water is very
hard, we recommend that you mix 50% tap water with 50% deionised water. Always
ensure that the water tank has been correctly repositioned in the unit after being
filled. To avoid damaging the unit, do not add perfume, vinegar, starch, descaler
or any other chemicals to the tank.
Locking and unlocking your iron
Unlocking your iron: slide the iron release button to the left, towards the
Locking your iron and moving the steam station: place the iron on its iron rest, making
sure that the tip of the soleplate is properly inserted into the soleplate tip housing.
Slide the iron release button to the right, towards the
Make sure the iron is properly locked before moving the steam station via the iron's handle.
Using your unit
•
Remove the tank from its housing.
•
Fill the tank via the water filler to its maximum level (1.8 L), then reposition the tank.
•
Place your steam station on a flat, stable surface. Plug the power cable into an electrical
socket.
•
Press the power button on the control panel once. The unit will then beep, and the operation
indicator light will light up to indicate that the unit is on.
Note: The low steam indicator light will turn on because the low steam level is
pre-programmed for when the unit starts up.
•
To select the steam level, press the steam level selection button. Select a different level
with each press of the button.
symbol.
19
EN
symbol.
Publicidad
