Publicidad
Idiomas disponibles
Idiomas disponibles
ES
PT
EN
FR
SHAVING
▶To begin shaving, plug in the machine to the power source. Ensure
that the voltage of the shaver matches that of your residence.
▶Next, press the ON button (fig. 5).
▶And you're ready to start, move the shaver in the opposite direction
of beard growth (fig. 6).
▶Shaving is more effective when your face is dry, so it's recommended
to shave before or when your face is thoroughly dry after washing. It
may take some time for your skin to adjust to this type of shaving.
▶Hair on the neck can also be shaved with the machine.
▶Turn off the shaver. Clean it and place the dust-proof cover to
prevent damage (fig. 7).
▶Never use the shaver if you detect any imperfections or damage to
the heads. This could harm the skin.
Instruction manual
CHARGING AND USAGE
▶Press the switch downward and disconnect the power source. If the
▶Charging power: 3W | 220-240V ~ 50Hz.
▶The shaver should not be used when directly connected to the
▶Once shaving is finished, turn off the machine.
MAINTENANCE
▶To achieve optimal shaving performance, make sure to clean the
▶Exercise caution with hot water; always ensure it's not too hot to
▶Remember to turn off the shaver before proceeding with cleaning.
▶Press the release button to open the shaving unit.
▶Proper care ensures optimal performance and extends the lifespan
CLEANING
▶Turn off and unplug the shaver to start cleaning.
▶The performance and durability of the machine will depend on
CLEANING FOR THE SHAVING UNIT
CLEANING THE SHAVING HEADS
charging indicator is on, it indicates that it's in the charging process.
After 8 hours, the charging will be complete.
electrical outlet.
shaver after each use. Regular maintenance translates to superior
shaving results.
avoid burns.
of your shaver.
regular cleaning.
• You should clean the shaving unit every week.
• You need to run the brush over the top first.
• Subsequently, press the button to remove the heads and move
them away (fig.11).
• Pass the brush inside and under the heads (fig.12).
• Once everything is clean, close the heads again.
• The cleaning of the heads should be every two months.
• Press the opening button and remove the heads (fig.11).
• Remove the frame (fig.13)
• Slide the shaving heads out of the retaining frame one at a time.
(Note: do not change the set of blades and protectors, or else it
will affect the performance of the appliance (fig.14)).
• Clean the blades with the brush (fig.15).
• Clean the protectors with the brush (fig.16).
• You can also clean the shaving heads with a degreasing liquid
ref. 07597
Publicidad
