BaByliss PRO FX7880RGE Manual Del Usuario página 7

after-sales service.
• Preserving the batteries - In order
to maintain the optimum capacity
of the rechargeable batteries, the
appliance should be recharged
for 3 hours approximately every
3 months.
• Using the trimmer on the mains
- ensure that the trimmer is swit-
ched off. Plug into a suitable mains
socket. Wait for approximately a
minute, and then switch on.
IMPORTANT: Do not use the trim-
mer in this mode for more than 20
minutes.
USE OF THE COMB GUIDES
This trimmer is supplied with 2
comb guides.
No.1 - 6mm
No.2 - 10mm
To attach a comb, hold it by the
sides and clip it over the teeth of
the blade. To remove the comb,
simply push off.
ZERO GAP ADJUSTMENT TOOL
IMPORTANT! Only ever attempt
to zero gap the blades using the
adjustment tool, following the ins-
tructions very precisely.
The adjustment tool is required to
adjust the blades to zero gap, to
achieve a closer, more precise cut.
Regular
REGULAR
Zero Gap
ZERO GAP
Step 1.
Before placing the blade into the
adjustment tool, use the screwdri-
ver provided to loosen the tension
screws, without removing them
completely from the blade holder.
Step 2.
Place the blade into the adjustment
tool in the side labelled 'Zero Gap'.
7
ZERO GAP