Beamz Pro BTF300Z Manual Del Usuario página 34

d001-d512
DHCP
Manual IP Address
Net Mask
DMX 1 / 2 / 3 / 4 Ch
ArtNet Net
Subnet
Universe
Channel
Auto Program
Speed
Manual Brightness
Strobe
Zoom
Curve 0.3-3.0
Mode Standard
Stage
TV
Architecture
Theatre
Studio
Custom
Authorization On / Off
Signal priority DMX
ArtNet
Signal hold On / Off
RDM On / Off
Screen Timeout 30sec.
Never
Screen brightness 10-100%
Dimming Freq 1.2KHz
1.6KHz
2.4KHz
4KHz
6KHz
20KHz
Yes / No
Yes / No
DMX address setting
DHCP (Dynamic Host Configuration Protocol) mode
xxx.xxx.xxx.xxx
IP address
255.0.0
Net mask for class A IP address
255.255.0.0
Net mask for class B IP address
255.255.255.0
Net mask for class C IP address
DMX channel mode
000-127
Set ArtNet net
000-015
Set ArtNet subnet
000-015
Set ArtNet universe
1 / 2 / 3 / 4 Ch
DMX channel mode
001-008
Preset programs
001-009
Programs speed
000-255
Dimmer 0-100%
000-255
Strobe, slow to fast
000-255
Zoom from wide to narrow
Dimmer curves adjustment
Select dimmer curve
Fade in (150ms~2230ms)
Fade out (150ms~2230ms)
Advanced settings for Beamz support only.
Signal priority setting
Run if signal cut
RDM function on / off
Display shut off time
Display brightness
Dimmer frequency setting
System reset
Display reverse 180°