Publicidad
Idiomas disponibles
Idiomas disponibles
Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present,
and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product
must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation
water might damage your unit. Leave the unit switched off until it has reached room temperature.
The label on the backside of the unit indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this.
Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must also be connected directly to the mains voltage
and no dimmer or adjustable power supply may be used.
Always connect the unit to a protected circuit (circuit breaker or fuse). Make sure the unit has an appropriate electrical ground
to avoid the risk of electrocution or fire.
Please consider the respective national norms during the installation! The installation must only be carried out by an
authorized employee or dealers!
•
Be sure that the bubble machine is positioned on a stable, non-slip surface.
•
Be sure that no ventilation slots on the product's housing are blocked.
•
Don't put any objects on the bubble machine.
•
Never connect the bubble machine to a dimmer or rheostat.
•
Keep the housing of this bubble machine dry at all times.
Do not spill water or other liquids into reservoir.
•
Drain the reservoir before transporting or storing the product.
•
•
Never drink bubble liquid or use it on the inside or outside of a human body. If fluid gets in contact with skin or eyes, rinse thoroughly
with water and call a doctor immediately!
•
Keep out of the reach of children.
•
For indoor use only.
Before filling unplug from mains!
Place the bubble machine on a flat level surface.
Fill the reservoir with "Beamz Bubble Liquid" (front of the machine). Make sure that you do not
fill the reservoir above the fill line. Filling above the line will result in damage to the machine.
After the usage, please empty the remaining liquid to prevent damage as well.
The wireless remote control have 4 buttons. Press one of the buttons (A,B,C or D) and the machine will produce bubbles as long
as you press the button.
Publicidad
