Publicidad
Idiomas disponibles
Idiomas disponibles
Operation.
1. Dry hair well with a towel.
2. Make sure your hands and body are dry.
3. Extend or slide the entire cable.
4. Make sure the rear grill (6) is completely clean before use.
5. Plug in to electrical current. Do not use power cord extenders.
6. Select the desired function with the multifunction selector.
7. Press and hold the cool air button (1) when you want cool air.
Release the button and you will return to the previously selected hot air.
NOTE.
- During drying, the dryer may suddenly stop working.
This is due to the anti-overheating safety system.
In this case, you must turn it off, unplug it and let it cool down for a few minutes.
Once it has cooled down, the dryer works properly again.
Tips and Warnings.
- Do not use the dryer in areas with steam condensation.
- Do not use the dryer in areas with a humid environment.
- Always keep the rear rack of the dryer clean.
- The speed button must be in position "0" before plugging in and unplugging the dryer.
- Never cover the air inlets or outlets.
- Never put it on wet or damp surfaces.
- Disconnect from the mains immediately after each use.
Cleaning the Hair Dryer.
- Disconnect the power cord.
- Remove the rear grill and clean it, remove hairs or accumulation of lint or dust.
- Replace the grill.
- Also clean the front air outlet removing any hairs.
CAUTION:
- Never clean the dryer while it is running and always unplugged from the power.
- Never use abrasive cleaners or scourers.
- Never immerse the dryer in water.
- Use a soft, dry cloth to clean the exterior of the dryer.
9
Publicidad
