Emerson LC321EM9 Manual Del Usuario página 19

Manual Register
The manual register function lets you add the channels that were not scanned
by the auto channel scan due to the reception condition at the initial setup.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
3
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
4
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
5
Press [SETUP] to exit.
Note:
• If set up completes successfully,
"Registered to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
• By using [CH K/ L ], you can select the memorized
channels only.
This function lets you check the digital signal strength of each channel.
1
2
3
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
4
11
Manual Register Manual Register
Register
For analog channels, select a
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
BACK
Back
Ch Change
5
Antenna Confirmation
DTV
Press [SETUP] to display the main menu.
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
Use [Cursor K / L] to select "Antenna", then press
[ENTER].
Use [the Number buttons] or [CH K / L] to select the
channel for which you want to check the digital signal
strength.
• If the channel is set to analog channel or external
input, you cannot confirm the antenna condition.
Press [SETUP] to exit.
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
11-1
Antenna Antenna
Back
Now 70 Peak 80
CH Ch Change
11
Antenna
Antenna
Back
Indicator is available for digital
broadcasting only.
CH Ch Change
19
EN