Cooper Lighting MSLED100 Manual De Instrucciones página 5

3. Modes of slide switch (Fig. 4):
AUTO: Normal working mode
ON: Light is constantly on as an
emergency lamp.
Note: Do not leave in this position. Always
return switch to the AUTO, or OFF position.
If light has been ON for more than 2 hours,
turn the switch to OFF and let the
batteries recharge.
OFF: Power is off for storage and long time charging.
Note: When the light is turned on for the first time, the LED light and the PIR will
start warming up. Then the LEDs will stay on for 40 seconds, flash 3 times and shift
to the detection mode. At night, the LEDs will stay on for 60 seconds after the last
movement was detected. If a movement is detected while the light is already on,
the duration time will be renewed and the LEDs will remain on another 60 seconds.
In the daylight or a bright environment, the light will not activate.
WHAT TO DO IF
LIGHT DOES NOT COME ON
WITH MOTION AT NIGHT
LIGHT COMES ON FOR NO
APPARENT REASON AT NIGHT
OR LIGHT STAYS ON AT NIGHT
AND DOES NOT TURN OFF
LIGHT IS ON DURING THE DAY
Call for customer service and/or missing or damaged parts (800-334-6871)
Is the surrounding external ambient light too bright? (If so, the
unit may think it's daytime.)
• Redirect the sensor or PIR
• Relocate or reposition the unit away from the light.
Is the fixture being charged during the day?
• Solar panel must be receiving sunlight to charge
during day (reposition if shadowed).
• Solar panel must be clean and free from debris.
• Check batteries, replace if necessary
• Make sure batteries have been charged for 4 full days of
sunlight prior to turning the fixture on.
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects
such as trees, traffic, etc.
TEST FOR YOURSELF
• Cover the sensor lens with cardboard to prevent
sensor from detecting motion. If the lights stay off,
something in the detection zone is triggering the sensor.
• Reposition or redirect lens of the PIR sensor
*If the lights stay on with sensor lens covered, or lights continue
to stay on, contact customer service.
Is the lens of the PIR sensor detector shadowed?
• Reposition motion sensor.
5
Fig. 4