Harman AKG DPT800 Modo De Empleo página 104

menu structure of the trAnsmitter
13.3 Silent mode
To switch on the transmitter in silent mode,
proceed as follows:
Step Description
1 When switching on the MUTE switch
(2), press with the ON/OFF switch (6)
held down at the same time
The entry RF‑OFF is shown on the
display.
DMS800 MANUAL
1/9
2/9
GROUP/CHANNEL
Display shows the group, channel and
frequency (no HF signal)
3/9
FREQUENCY
Display shows the frequency and country
(no HF signal)
4/9
COUNTRY
Display shows the country and serial
number (no HF signal)
5/9
SERIAL NUMBER
Display shows the serial number and
software version
(no HF signal)
6/9
SOFTWARE VERSION
Display shows the software version and
frequency band
(no HF signal)
7/9
HARDWARE VERSION
Display shows hardware version and
frequency band
(no HF signal)
8/9
BAND
Display shows frequency band and
transmitter name
(no HF signal)
9/9
MIC GAIN
Display shows set microphone level
(no HF signal)
104