USRobotics USR997930 Guia De Instalacion página 7

Note: For networking information, refer to your operating system's documentation.
Register your product online at http://www.usr.com/productreg
Troubleshooting
My 8-Port 10/100/1000Mbps Switch is properly connected to my Ethernet-
ready device but my connection speed is slow.
Possible Solution:
Verify that your network adapter and/or additional Ethernet-ready device supports
1000 Mbps. You may be using a 10/100 Mbps device. A blinking orange light indicates you are
receiving and transmitting data at 10/100 Mbps. A blinking green light indicates you are receiving
and transmitting data at 1000 Mbps. To achieve 1000 Mbps speeds, replace any 10/100 Mbps
devices you are using with 1000 Mbps devices.
Possible Solution:
Verify you are using a known and reliable RJ-45 Category 5 Ethernet cable. An old or unreliable RJ-
45 Category 5 Ethernet cable could diminish your link quality. It may be necessary to replace your
RJ-45 Category 5 Ethernet cable.
Possible Solution:
The length of your Ethernet cable between your 8-Port 10/100/1000Mbps Switch and your
U.S. Robotics 1 2
SPD
LNK
ACT
FDX
This is one of many possible configurations.
3 4 5 6 7 8
3