Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONS
Handle
LED light
Transparent cove
Protective frame
Charging indicator
USB charging port
CHARGE
There is a built-in lithium battery inside the lantern.
Please fully charge it before your first-time use.
• Step 1: Take out the plug on the base.
• Step 2: Charge the lantern using the USB-C cable.
It takes about 2 hours to reach a full charge.
Guide of the charging indicator
Torch
Power button
Base
• Charging: solid red
• Fully charged: solid green
10
INSTRUCTIONS FOR USE
1. POWER ON/LOW BRIGHTNESS MODE
2. MEDIUM BRIGHTNESS MODE
Press the power button to switch the light on,
After powering on, press the power button
low-intensity lighting mode is engaged.
once to enter to the medium brightness
mode.
4. TORCH MODE
5. SOS MODE
After switching to high brightness mode,
After torch mode, press the power button a
press the power button a third time to
fourth time to activate the SOS mode. The
activate the torch mode.
lantern then lashes for emergency case.
3. HIGH BRIGHTNESS MODE
After powering on, press the power button
twice to activate the high brightness mode.
TIP
If you let more than 10 seconds pass without
changing mode, the lantern will switch off the
next time you press the power button.
11
Publicidad
