Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING THE DOOR-OPENING DIRECTION:
TOOLS REQUIRED:
An Allen screwdriver.
PROCEDURE:
1. Unplug the refrigerator and take everything from
the compartment.
2. Undo the bottom hinge screws of the appliance
with a Phillips screwdriver. Take care that the
washers do not get lost.
3. Lift off the bottom hinge.
4. Remove the door.
5. Take out the top hinge pin and fit it on the other
side of the refrigerator. Take care that the upper washer does not get lost.
6. Change the position of the lower hinge pin.
BEFORE SWITCHING THE REFRIGERATOR ON:
Clean the inside with warm water and bicarbonate of soda. Rinse and dry
carefully.
Wait for 2 hours before starting, to ensure that the motor lubricants have
stabilised.
If the refrigerator has been switched off, wait 4 hours after restarting before
placing food inside.
All manuals and user guides at all-guides.com
7. Set the upper washer and the door in place.
8. Refit the bottom hinge with its washers on the
other side of the refrigerator.
9. If fitted, change the lateral handles to the
other side.
Switch the appliance on and check that the
sealing strips seal properly when the door is
closed.
5
Publicidad
