Publicidad
Idiomas disponibles
Idiomas disponibles
5. Before the first use
Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!
6. Contents of packing
1× Nexxsaw
1× Protection cover
1× Guide bar
1× Saw chain
1× Battery
1× Charger
1× Instruction manual
7. Intended use
• The Nexxsaw has been exclusively
designed for cutting branches. The saw
is not intended for continuous commer-
cial use.
• The intended use also includes an opera-
tion following the operating instructions.
• In conjunction with the extension handle,
the Nexxsaw can be used as a pruner for
cutting branches.
• Any use beyond these parameters (dif-
ferent media, applying force) or any
changes (reconstruction, no original
accessory) can lead to serious risks and
is regarded as use that is contrary to the
intended purpose.
8. Use
Mounting the saw chain
8.1
(See Fig. B).
Always wear gloves when handling the
saw chain.
a. Unscrew the head screw (2) coun-
ter-clockwise in order to remove the
sprocket cover (9).
b. Remove the guide bar from the machine
and run the saw chain around it.
Please note the running direction of the
saw chain. The saw chain icon is shown
on the cover.
c.
Run the saw chain over the sprocket
(13) and replace the guide bar.
d. Use an oiler to oil the saw chain and the
sprocket.
e.
Re-tighten the sprocket cover (9) with
the head screw (2) on the housing.
Lubrication
8.2
The saw chain must be lubricated when the
tool is in operation.
CAUTION:
• Only use commercially available, biode-
gradable chain oils.
• Do not use engine oil, waste oil or other
mineral oils.
• Never use oil including dust and particles
or volatile oil.
• If the saw makes a rattling noise, the
chain must be lubricated.
Grease the chain of the Nexxsaw regularly
with biodegradable oil.
Adjusting saw chain tension
8.3
CAUTION: Do not tighten the saw chain too
much. Excessively high tension of saw
chain may cause breakage of saw chain,
wear of the guide bar and breakage of the
sprocket.
CAUTION: A chain which is too loose can
jump off the guide bar.
The saw chain may become loose after use.
From time to time check the saw chain
tension, certainly before each use.
a. Remove the battery.
b. Loosen the head screw (2) a bit to
loosen the sprocket cover lightly.
c.
The tension spring automatically tight-
ens the chain.
d. Tighten the head screw (2) to secure
the sprocket cover.
Switching ON and OFF
8.4
The use of the Nexxsaw without lubricating
the chain with chain oil will damage the saw
chain and the guide bar.
a. Insert the battery into the battery
recess.
b. Hold the Nexxsaw firmly and securely
by the handgrip.
c.
To switch on the Nexxsaw, first press
the safety switch (4).
d. Then press the ON/OFF switch (5).
e.
To switch off the saw, release the ON/
OFF switch.
English
9
Publicidad
