Cd Player Operation - Jensen CD6111 Manual De Instrucciones

CD PLAYER OPERATION

Insert CD
With the label surface facing up, gently insert the disc into the CD slot (21) until the soft-loading
mechanism engages and pulls in the disc. Disc play begins, "S--CDP" will appear in the
display, and the CD icon will become animated. The center of the disc icon (7) illuminates and
becomes animated, and the track number and elapsed time appear in the display.
NOTE: The unit is designed for play of standard 5" (12 cm.) compact discs only. Do not
attempt to use 3" (8 cm.) CD singles in this unit, either with or without an adaptor, as
damage to the player and/or the disc may occur. Such damage will not be covered by
the warranty on this product.
Track Select
Track select features are used to quickly access the beginning of a particular track when a disc
is in play. Press the Up Tuning button (14a) to move forward or the Down Tuning button (14b)
to move backward on the disc to locate the desired track. Track numbers will appear in the
display as they are accessed.
Press and hold the Up or Down Tuning buttons to fast forward or fast reverse through a disc.
During either function, the elapsed time will appear on the display. Release the button to
resume CD play.
Play/Pause
Press the play/pause button (23) to suspend disc play. "S--PAUSE" will appear in the display,
and the center of the disc icon (7) will stop rotating. Press the play/pause button again to
resume disc play. The "S--PAUSE" indication will disappear from the display, and play will
resume from the pausing point.
Disc Scan (SCN)
During disc play, press SCN (24) to play the first 10 seconds of each track on the disc. "S--
SCN" will appear in the display. When the desired track is reached, press SCN again to end the
scan function and play the selected track. "S--SCN" will disappear from the display. The scan
function will also be canceled when activating the repeat or shuffle functions.
Disc Repeat (RPT)
Press RPT (25) during disc play to continuously repeat the selected track. "S--RPT" will appear
in the display. Press RPT again to stop repeating. "S--RPT" will disappear from the display, and
regular play will resume. The repeat function will also be canceled when activating the scan or
shuffle functions.
Disc Shuffle (SHF)
Press SHF (26) during disc play to play all tracks on a CD in random, shuffled order. "S--SHF"
will in the display. Press SHF again to stop random play. "S-SHF" will disappear from the
display, and regular play will resume. The shuffle function will also be canceled when activating
the scan or repeat functions.
Disc Eject
Press the eject button (27) to stop CD play and eject the disc. The unit will change to tuner or
CD changer operation, depending on which mode was in operation prior to disc play. If the disc
is not removed from the unit within 15 seconds, the disc will be reloaded to prevent accidental
damage. The CD icon (7) will appear in the display to indicate that a disc is loaded in the
player. Disc play can be resumed by pressing MODE (2) to choose the CD player function.
CD Player Error Codes
If a problem should develop while operating the CD player, an error code (ER-1, ER-2, etc.)
may appear on the display panel. This can indicate a number of problems with the unit,
including a mechanical error or an error in the microprocessor control of the player. If an error
code should appear, try ejecting and reloading the disc into the player. While the disc is out of
the unit, make sure it is clean and undamaged, and then load it correctly. If this does not solve
the problem, pressing the reset button (11) may help, but will erase the time and preset
memory. If the suggested measures do not solve the problem, contact an approved warranty
station near you for further assistance.
8
CD6111