ALPENHEAT AD10 Manual página 4

EN
ALPENHEAT Boot Dryer and Warmer CIRCULATION
DE
Model: AD10 (230V/120V green)
Contents:
SK
1 pair of dryers with Y cables
PL
INSTRUCTIONS
How to use:
1. Put one dryer into each shoe.
SI
2. Push each dryer right into the front of the shoe so that they are positioned flat on the
insole.
3. 230V/120V: Plug into a household outlet. 12V: Plug into a 12V outlet.
HR
4. After 10 minutes the bootdryers will be warm and will reach their operating temperature
after about 30 minutes.
SE
5. With built-in UV light to kill bacteria
Helpful Tips:
LV
Dry sport shoes after every work-out to prevent bad odor, athlete's foot or bacteria developing.
Warning:
FR
- DO NOT USE TO DRY ANY OTHER ITEMS.
- Circulation is intended to dry footwear (shoes, boots, etc.) only.
CZ
- Check the voltage before plugging in the dryers (230V/120V or 12V).
- Do not immerse into water.
- Do not use near or next to flammable substances.
NL
- Do not put any other objects into the footwear whilst the dryers are turned on.
- Keep out of reach of children.
- If the cable is damaged, it must be replaced by the manufacturer, its service agents or
FI
similarly qualified persons in order to avoid a hazard.
- Always unplug device after use.
IT
SPECS:
- Air circulation holes
RU
- Output: max. 8.5 Watt
- Weight: 160 g
- Dimensions: L 16 x W 5 x H 3 cm
ES
DISPOSAL OF PRODUCT
NO
This product must be disposed of according to the prevailing guidelines for disposing of used
electrical and electronic appliances.
The symbol on the product or on its packaging indicates that this product must not be treated
HU
as household waste, but must be disposed of at a collection point for the recycling of
electrical and electronic appliances. By your contribution to the correct disposal of this
product you are helping to protect the environment and the health of your fellow mankind. Hu-
RS
man health and the environment are endangered by inappropriate waste disposal.
Recycling helps to reduce the consumption of raw materials.
RO
4
ENGLISH