Maintenance; Warranty Terms; Fcc/Ce Warning - Extel O’OUT HD Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48

14. MAINTENANCE

The guarantee is void if parts have been dismantled. Clean the outside with a soft, dry cloth only. Before cleaning,
disconnect or switch off the video surveillance system.
WARNING
Do not use any carboxylic acid, alcohol-based or other similar product or solvent. In addition to the risk of
damage to your device, fumes are also dangerous to health and are explosive.
Do not use any tool which may conduct electricity (metal brush, pointed tool or other) to clean the equipment
The latest version of the instructions in colour is downloadable from: www.cfi -extel.com

WARRANTY TERMS

This appliance has a parts and labour warranty in our workshops.
The warranty does not cover: consumables (batteries, etc.) and damage caused by: incorrect use, incorrect
installation, third party intervention, deterioration through physical impact or electric shock, dropping, or
atmospheric phenomena.
• Do not open the appliance as this will void the warranty.
• When returning the appliance for eventual servicing, protect the screen to avoid scratches.
• Clean using a soft cloth only, do not use solvents. The guarantee is void if parts have been dismantled. Clean the
outside with a soft dry cloth only. Before cleaning, disconnect or power off the appliance.
The shop receipt or invoice is the proof of the purchase date.

15. FCC/CE WARNING

Comment: This equipment has been tested and found compliant with the limits of a class B appliance, in
compliance with applicable European standards. These limits are designed to provide reasonable protection from
interferences in a residential installation. This equipment uses, and can transmit radio frequency energy and, if not
installed and used following instructions, can cause interference to radio communications.
However, there is no guarantee that the interferences will not occur in a specific installation. If this equipment
causes interferences to radio or TV reception, which can be determined by powering the equipment on and off,
the user is encouraged to attempt to rectify the interferences using at least one of the following methods:
• Redirect or move the receiver antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment to a socket on a different circuit than the circuit the receiver is connected to
NL23
GB23
If required, our technical site is at your disposal: www.cfi -extel.com
CFI EXTEL O'OUT HD - 10/2015
CFI EXTEL O'OUT HD - 10/2015

Publicidad

Tabla de contenido
loading

Tabla de contenido