Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Cleaning
Remove the power cord from the power outlet after
use for safety reasons.
Processing bowl and lid
Due to the interlock components, we do not
recommend immersing the bowl and lid in water for
long periods.
To keep your bowl and lid clean, and to avoid food
drying, follow these steps as soon as possible after
use:
• Rinse most of the ingredients off the bowl and lid.
• Hand wash in clean warm, soapy water using a
mild liquid detergent and non-abrasive sponge.
• The processing bowl and lid may occasionally
be washed in the dishwasher (top shelf only),
however washing in the dishwasher is not
recommended on a regular basis, as prolonged
exposure to harsh detergents, hot water and
pressure will damage and shorten the life of the
plastic and the interlock components.
WARNING
Oils in citrus rind can damage the material of your
food processor bowl if being exposed to it for a
longer period. Always clean your processing bowl
immediately after processing citrus rind.
WARNING
Do not touch the blades of the Dicing Grid. They
are extremely sharp.
Dicing gearbox and accessory caddy
The dicing gearbox and accessory caddy
(if needed) should only be hand washed.
Blades and disks
• Blades and disks are razor sharp, do not touch.
Always use a spatula or brush to remove food or
when cleaning blades.
• Spindle, blades and disks can be washed in the
dishwasher.
Removal of Dicing Blade
1. With the lid removed from the bowl, use your
thumb and forefinger to carefully grasp the
dicing blade hub.
2. Lift up and simultaneously twist off the dicing
gearbox and set aside.
NOTE
If you cannot remove the blade, return the lid onto
the bowl, place the large pusher into the lid feed
chute and press the pulse button until you see the
blade tip stop in the 'insert blade' area.
Then, repeat steps above.
Cleaning the Dicing Grid
EN
17
Publicidad
