Tripp-Lite AGSM500USBKJR6 Serie Manual De Operación página 4

200208108 93-2089 OmniSmart725 Owner's Manual.qxd
Quick Installation
These connections are optional. Your UPS will function properly without these connections.
1 Phone Line/Network Line
Surge Suppression
(Select models only)
Your UPS has either RJ45 jacks, used to protect
against surges over a phone or network data
line, or RJ11 jacks, used to protect against
surges on a phone line only. See Specifications
to determine which jacks your model has.
Using telephone cords or network data cables as
appropriate, connect your wall jack to the UPS
jack marked "IN". Connect your equipment to
the UPS jack marked "OUT". Make sure the
equipment you connect to the UPS's jacks is
also protected against surges on the AC line.
USB Communications
2
Use any USB cable to connect the USB port of
your computer to the USB port of your UPS.
Download the PowerAlert UPS monitoring
software program
operating system from www.tripplite.com and
install it on your computer.
Basic Operation
Buttons
Use the ON/OFF button to do three things:
optional
appropriate for your
Switch your UPS's Operating Mode: While your UPS is plugged
into a live AC outlet, press the ON/OFF button and hold it until you
hear a beep (about 2 seconds) to toggle between the following
operating modes. Choose your UPS's operating mode based on the
regional guidelines in Step 3 of the Quick Installation section.
• UPS Mode: ENABLES battery backup. UPS Conditions: The UPS
charges its battery and supplies power at its receptacles when it is
receiving utility line power. If utility power fails, the UPS provides
power from its batteries. The "
Advantages: Provides battery backup during blackouts or brownouts.
4 4
9/12/2002 9:22 AM
NORM DELAY
1
NORM DELAY
2
" indicator light is lit. Setting
Page 4