CRX CRX420 Manual De Instrucciones página 6

This engine is designed and manufactured for specific applications.
Do not attempt to modify the equipment or use it for any application
for which it was not designed. If you have questions about specific
applications, please contact FNA Group at cservice@fna-group.com
or 1-877-362-4271.
2. Slide the fuel switch to the ON position.
3. Turn the ON/OFF switch to the ON position.
4. Slide the choke lever to the CHOKE position.
5. Move throttle lever to the FAST position.
6. For electric starting, refer to your equipment manual.
7. To manually start the engine, first turn the switch to ON (refer to
your equipment manual). Grasp the recoil starter handle and
pull it slowly until resistance is felt. Pull rapidly to avoid kickback.
8. When the engine is running, slide the choke lever back to the
RUN position.
3. Turn the switch to OFF (refer to your equipment manual).
4.Turn the fuel switch to the OFF position.
Terminal application
The engine starter requires the electrical system to be started or
powered by a 12-volt (V) battery with a minimum capacity of 14
ampere-hours (Ah). The positive (+) lead from the battery
connects to the positive terminal on the starter relay. Connect the
negative (-) lead from the battery to an engine mounting bolt, the
conductive frame supporting the engine or any other engine
grounding point.
DO NOT connect the negative (-) battery lead to the oil filter
mounting base or any part of the fuel system.
Positive
terminal