Taurus PARADISE SILENT Instrucciones De Uso página 10

• Place the water tank under the tap and add water
according to the illustration.
• Fill the water tank taking care to observe the MAX level in
the mist flow tube (D).
• Put the water tank back into its housing, ensuring that it is
inserted properly fitting the water tank anchorage (I) with
the corresponding recess in the water tank.
• Put the tank cover (B) back to it's place.
METHOD 2 (FIG. 2)
• Remove the tank cover (B).
• Pour water directly into the tank with the help of a glass,
bottle or filling cup.
• Fill the water tank taking care to observe the MAX level in
the mist flow tube (D).
• Put the tank cover (B) back to it's place.
USE
• Extend the supply cord completely before plugging it in.
• Connect the appliance to the mains.
• Guide the mist outlet to direct the flow of air in the desired
direction (Fig. 3)
• Turn the appliance on, by using the ON/OFF knob.
• Choose the desired mist flow with the control knob
between MIN a MAX flow position.
• If there is insufficient water in the tank, the knob light will
change from blue (the appliance is in operating state) to
red light and will turn off automatically. Before turning the
device back on, follow the "Stand-by function" section
steps.
AROMATHERAPY FUNCTION (FIG. 4)
• If you wich to use a water-based aroma essence, pour a
few drops (3-5) in the essence compartment (H).
• Do not pour the aroma essence directly into the water
tank.
MIST FLOW CONTROL
• The appliance has a control knob (G) that allows getting
the control of the steam flow.
STAND-BY FUNCTION
• If the appliance runs out of water or there is a water
shortage it will turn off automatically and the knob (G) will
light in red.
• Disconnect the appliance and fill with water.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Select the minimum position (OFF) using the control knob
(G).
• Unplug the appliance from the mains.
• Remove the water from the water tank.
• Clean the appliance.
ATTENTION: The water tank must be cleaned every 72
hours.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• Never immerse the connector in water or any other liquid
or place it under running water.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• Then dry all parts before its assembly and storage.
• There may be some scale deposits in the atomizer (K),
particularly in areas with hard water. Overcome this
drawback by cleaning the atomizer (K).
• Rub down with a dry cloth and remove remains of
moisture.
• Do not place the atomizer (K) directly under the tap.
• Do not rub the atomizer (K) with hard or metal objects.
• Do not clean with chemical products.
CLEAN THE FILTER:
• Remove the filter (N) by opening the filter lid (O) pulling
the latch inwards.
• Remove the filter (N) from the appliance and clean it by
placing it under the tap.
• Leave it to dry.
• Once dry, put it back onto the appliance and close the
filter lid (O) by pressing it until you hear a click.