Publicidad
Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a
high-quality product. Familiarise
yourself with the product before
using it for the first time.
Read the following as-
sembly instructions and
the safety information
carefully.
Use the product only as described
and only for the given areas of
application. Store these assembly
instructions carefully. When pass-
ing the product on to third parties,
please also hand over all accompa-
nying documents.
Read all safety informa-
tion and instructions Failure
to comply can cause serious
injuries.
Scope of delivery
(fig. A)
1 x pavilion, unassembled (1-9)
1 x assembly materials (10)
1 x pavilion roof (11)
4 x side wall (12)
8 x ground spike (13)
1 x Allen key (14)
1 x assembly instructions
Technical data
Dimensions:
approx. 295 x 295 x 240cm
(w x d x h)
Date of manufacture
(month/year): 12/2021
Intended use
The product is designed for protec-
tion against the sun outdoors.
It is not intended for long-term use
outdoors because it is weather-resist-
ant only to a limited extent.
The product is not intended for com-
mercial use.
Safety instructions
Danger to life!
• Never leave children unsupervised
with the packaging material. Risk
of suffocation.
Risk of injury!
• The product may not be used in
adverse weather conditions such
as strong wind, rain, or snow.
• Dismantle the pavilion when wind
speeds of more than 40km/h
are anticipated (brisk wind, fairly
large branches and trees are
moving, and the wind is plainly
audible).
• Stand the product on an even
surface.
• The product may only be used
under adult supervision and not as
a toy.
• Check the product for damage or
wear before each use.
• Check that all parts have been
correctly assembled before each
use. Incorrect assembly can lead
to injuries and may also compro-
mise safety and function.
• No open fire, grills, or patio heat-
ers are permitted in or close to the
pavilion. Should a pavilion catch
fire despite these precautions, get
out immediately! Use a fire extin-
guisher or water to put out the fire.
Call the fire brigade immediately if
needed.
• Individual pavilions may not be
connected or attached to each
other. A minimum distance of 3m
must be kept between individual
pavilions.
• Any pockets of water that form
must be emptied.
Selecting the location
• The product measures 3 x 3m.
• Place the product preferably in a
location protected from the wind.
• The ground should be flat and
the ground spikes should provide
adequate stability.
Assembly
Parts list (fig. A)
1 – leg
2 – cross pole
3 – cross pole
4a – roof corner pole
4b – roof corner pole
5 – roof pole
6 – roof connection
7 – roof decoration
8 – connecting piece
9 – base
Note! At least 2 people are
needed to assemble the prod-
uct.
We recommend 4 people for
assembly.
Step 1
Slot each cross pole (2 and 3) onto
the connecting piece (8) and screw
both poles together tight using the
screws (10) (fig. B).
Note: The two screw holes in
the centre are not in use just
yet.
Step 2
Insert the bases (9) into the legs (1)
and screw the cross poles down
tight on the legs (1) using the
screws (10) (fig. C).
Step 3
Lay the roof connection (6) on the
ground and insert the roof corner
poles (4a + 4b) and roof poles (5)
into the roof connection (fig. D).
Note: The locking pins must
face down towards the
ground to prevent water ac-
cumulating.
Step 4
Fasten the roof corner poles (4a
+ 4b) to the legs (1) and the roof
poles to the cross poles (fig. E) using
the screws (10).
Step 5
Slot the roof decoration (7) onto
the legs (1) and pull the pavilion
roof (11) over the assembled roof
frame (fig. F).
GB/IE
13
Publicidad
