Publicidad
Idiomas disponibles
Idiomas disponibles
PT
EN
Some components that come with the equipment are small parts and are sent in a plastic bag.
Unpack the product in a clean and organized environment so as not to lose these parts.
Trigger with filter
Start by threading the trigger inlet (1) onto the hose (2) [Fig. 01].
Next, fit the seal ring (3) so that you can thread the trigger onto the rod [Fig. 02].
2
Spraying rod
Couple the trigger (1) to the spraying rod (4) by threading the brass tip of the spraying rod onto the valve or trigger [Fig. 03].
Insert the base of the spraying nozzle (5) onto the end of the spraying rod (4) [Fig. 04].
The spraying rod (4) is retractable, with adjustable length.
1
Fig. 03
Spraying nozzle
A tapered brass nozzle comes coupled to the rod. However, it can be replaced with one of the optional nozzles that come with
the equipment.
To replace the brass nozzle with a plastic nozzle, remove the brass nozzle from the spraying base (4) and insert the desired nozzle (5)
that comes with the equipment. Check the condition of the seal ring (3) [Fig. 05].
14
14
INSTALLATION
1
Fig. 01
4
4
3
Fig. 05
Fig. 02
4
Fig. 04
5
3
5
Publicidad
