S&P CPTA Manual Del Usuario página 13

1.4. WARRANTY
Any change or additional devices within the product, as well as any changes to
the initial wiring are prohibited without authorisation from the supplier and could
EN
result in the cancellation of the certifi cation and the warranty. The device must
be used in accordance with the manufacturer's specifi cations, otherwise the
function it should perform may be compromised. Defects related with abnor-
mal use or use that is not in accordance with these warnings are excluded from
the warranty, as are defects found as a result of normal wear and tear, incident
caused by negligence, lack of supervision or maintenance, defects due to inco-
rrect installation of the device or poor storage conditions before assembly. Under
no circumstances shall Soler & Palau be held responsible for material that has
been modifi ed, repaired or dismantled, even partially.
2. PRODUCT PRESENTATION
®
• Components of the AJUST'AIR system.
• Suitable for many fl ow regulation and modulation applications.
• Presence sensor that detects infra-red radiation connected with the heat emi-
tted by a body in motion.
• Detection of the pyroelectric sensor located beneath the Fresnel lens.
• Detection angle: 360°.
• Output for ventilation control (dry contact) + illumination (230 V).
3. INSTALLATION
3.1. SIZE
CPTA-S ASSEMBLY CPTA-E EMBEDDED ASSEMBLY
Fixing:
Power box to integrate in false ceiling
(L x H x P) = 123 x 58 x 37 mm
13