babymoov Hygro+ Instrucciones De Uso página 7

Hygro+''s humidifier function lets you adjust the humidity level in the room in which it is installed.
N.B.: The recommended humidity level for your child's bedroom is between 40 % and 50 %.
MANUAL MODE
- Remove the humidifier cover (1) and remove the essential oil diffuser (2).
- Remove the water tank (3) from the humidifier base.
- Turn water tank upside down and unscrew water tank cap (4).
- Fill the tank with tap or distilled water.
N.B.: cold water - maximum 0.7 gallon (2.5 l.). Do not use hot water.
- Screw water tank cap back on water tank and set on the humidifier base.
N.B.: wait a few seconds before the base of the humidifier is filled with water. The Babymoov logo on the water tank must be
facing outward.
- Replace the essential oil diffuser (2) in the centre of the chimney, and replace the cover (1) on the water tank.
N.B.: the essential oil diffuser must be positioned point down.
- Plug your Hygro+ humidifier into a wall outlet using the power cord, and press the ON button
- Select the desired quantity of steam using the +/- buttons, then point the steam output in the desired direction using the cover
(1).
- 1 level: steam flow rate = 3.7 fl oz./hour (110 ml/hour)
st
- 2 level: steam flow rate = 5 fl oz./hour (150 ml/hour)
nd
- 3 level: steam flow rate = 6 fl oz./hour (180 ml/hour)
rd
- 4 level: steam flow rate = 7.3 fl oz./hour (220 ml/hour)
th
- 5 level: steam flow rate = 8.3 fl oz. (250 ml/hour)
th
The steam flow rate is automatically reset to the last setting when the humidifier is unplugged or turned off.
N.B.: ensure that the steam is not directed toward a wall socket or other electrical device.
- Your Hygro+ humidifier is ready to use! It's already producing pure, cool vapour throughout the entire room.
- To shut off the humidifier, simply press the OFF button
N.B.: after 30 seconds of inactivity, the screen automatically switches to stand-by mode. To reactivate it, simply press the ON button.
WATER QUANTITY AND TIME OF USE
N.B.: the amount of water in the water tank and the selected steam flow rate determine how long the humidifier will run.
The Hygro+ humidifier is designed for 22 hours of maximum autonomy.
The water level indicator
SETTING THE HYGROMETRY LEVEL WITH NO COUNTDOWN
Press during 3 seconds to set the automatic stop of Hygro+.
auto
- «90%» flashes. Press + /- to select the appropriate hygrometry level.
- Press for 3 seconds to enter the setting and activate the setting.
auto
becomes blue. The current humidity level of the room is displayed.
auto
Your Hygro+ humidifier will automatically stop once the requested humidity level is reached.
Press briefly to check the setting.
auto
The hygrometry level is displayed for 3 seconds.
How to change the setting:
- Press for 3 seconds. The last setting flashes on the display.
auto
- Press + /- to select a new hygrometry level.
- Press for 3 seconds to enter and activate the new setting. .
auto
becomes blue. The current hygrometry level of the room is displayed.
auto
To disable the setting and go back to manual mode, press «ON/OFF» for 5 seconds.
auto
SETTING THE HYGROMETRY LEVEL WITH A COUNTDOWN
In order to set the automatic stop of Hygro+, press
- «90%» flashes. Press + /- to select the appropriate hygrometry level.
- Briefly press : «00:00» is displayed and flashes. Press «+ /-» to set the timer with 30-minute brackets (e.g.: 00:30 / 01 :00 /
auto
01 :30, etc.).
N.B.: a longer pressure on «+/-» will help you set the timer faster.
- Press for 3 seconds to enter and activate the new setting.
auto
becomes blue. The current hygrometry level of the room is displayed (02:30 means the humidifier will start in 2 hours and 30 min).
auto
Your Hygro+ humidifier will automatically stop once the requested humidity level is reached OR when the timer reaches «00:00».
Press briefly to check the setting.
auto
The hygrometry level is displayed for 3 seconds. The timer will then appear for 3 seconds before the initial display appear.
HUMIDIFIER FUNCTION
turns on when there is insufficient water in the tank.
auto
HYGRO + • Instructions for use
.
for 3 seconds.
.
becomes white again..
auto
7