Descargar Imprimir esta página

HAEGER Frozen Pro INOX Instrucciones De Uso página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
Troubleshooting
Problem
indicator turns on
indicator lights up
indicator blinks
The ice maker stops
working.
The ice basket is full
but the "
"
indicator does not
illuminate.
The ice collects
together.
Possible causes
1. Low water level or lack of
water
2. The water screen at the
bottom of water reservoir is
blocked.
3. Pump malfunction.
1. Ice basket is full and the
infrared light is blocked by
the ice.
2. Infrared light-emitting diode
& light-receiving diode do
not work
The ice shovel is blocked.
The ice tray is not in the right
position.
The "ice full" condition cannot be
detected as the infrared light
module is interfered by the
sunlight.
Making ice takes too much time.
The water in the water reservoir is
of too low temperature.
English - 10 -
Solution
1. Stop making ice, refill water and
then press "
ice-making cycle.
2. Do cleaning.
3. Send it to the authorized
department for repair.
1.Remove the ice from ice basket.
2a. Wipe up the foreign objects on
the
infrared
diode & light-receiving diode
and restart the ice maker.
2b. Call Customer Service if the
infrared light-emitting diode &
light-receiving diode still cannot
work after wiping up the
foreign objects on them and
restarting the ice maker.
Please remove the ice if the ice
shovel is blocked by ice, otherwise,
call
customer
consultation.
1. Remove the ice in the ice tray and
press the "
" key to restart the
appliance.
2. Call Customer Service if the
appliance still cannot work after
restart.
Unplug the appliance and move it to
a place which is not exposed to the
sunlight, then plug the appliance
and activate it again.
Stop making ice and restart the ice-
making cycle after the ice melts.
Fill the water tank with water
temperature between 8℃ and 25℃.
" key to restart
light-emitting
service
for

Publicidad

loading

Este manual también es adecuado para:

Im-15s.006a