Publicidad
Idiomas disponibles
Idiomas disponibles
Introdution
Technical description
Getting started
Affiliation a system
Display
Settings of a system
Configuration
Rename
End positions
Delete
Adding systems to/ deleting systems from groups
Rename
Delete
Setting of transmitter
Menu setup
Informations
Language
Display setup – Brightness
Display setup – Display calibration
Display setup – – Welcome message
Display setup – Timeout display
TX Power
Restore
Battery management
Recharge the batteries
Technical description
This manual is an integral part of the product and must be kept for future reference after
installation.
It contains instructions for the correct installation and use of the system.
Follow these instructions carefully to prevent injury to people and damage to property.
The two-way R. F. transmitters Ref. 5455 and Ref. 5459 have been developed by Mottura for remote control of their proprietary
motorised systems. Therefore, any other use is considered as not conforming to technical specifications, and in such cases the
manufacturer will not be liable for any malfunction, injury to people, or damage to property.
The Mottura S.p.A. Quality System is certified under UNI EN ISO 9001 by certification authority DNV, and guarantees the
manufacturing process control.
Ref. 5455 R. F. Transmitter touch screen for 15 systems
Ref. 5459 R. F. Transmitter touch screen for 99 systems
The transmitters Ref. 5455 and Ref. 5459 use the new M2net two-way radio transmission protocol (868 MHz or 915 MHz
depending on the regulating standards in the country of use), developed by Mottura S.p.A. on the basis of many years of
experience gained in the field of Build Automation.
The M2net two-way radio transmission protocol guarantees continuous interaction between the transmitters and the motorised
systems. Compared to one-way radio transmission, through which just a single control can be given, the M2net two-way radio
transmission protocol allows systems to be monitored in real time (confirming controls received, their execution, signalling any
faults, etc.).
The transmitters Ref. 5455 and Ref. 5459 have been designed to reduce energy consumption to the minimum. If the unit is
inactive for a period of 4 seconds it will shut down.
Fully charge the batteries before the first use.
Once the setting are complete, block the menu of transmitter (see "Setup menu" point).
Contents
Introduction
Technical description
1
1
1
2
3
3
4
4
4
5
5
6
6
6
7
7
7
7
8
8
8
9
9
9
10
10
11
Publicidad
