DeLOCK 62742 Manual Del Usuario página 3

English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Pay attention that the HDD can be hot when it is connected to the device.
Installation
1.
Connect your SATA 22 pin device to the converter.
2.
Now connect this USB 3.0 cable to a free USB port of your computer.
3. There is no driver required, so the device is ready to be used.
Using of the protection case
You can put a 2.5" hard drive or SSD into the protection case, unless it doesn't
exceed the allowed height.
After that you can start the installation, like described above.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 11/2018
-3-