Beeper Lite Manual Tecnico página 23

USE OF THE BATTERY (CONTINUED)
2. Charger usage precautions
Please read the following instructions carefully before each use of the charger:
The charger only works with the dedicated AC adapter. Using any other adapter may damage the product.
The adapter should be plugged into a normal, easily accessible household outlet.
Do not cover, expose to heat or moisture and use in a ventilated area.
Do not place other equipment on the charger.
Do not leave the charger plugged in when not in use.
Do not use the charger if it is damaged.
The external flexible cable of this transformer cannot be replaced. If the cord is damaged, the transformer should
be scrapped.
Never connect and disconnect the battery connection terminals while the power cable is still connected to the
mains. Always remove the plug from the socket first.
Do not store your mains charger in low temperature areas. When the device returns to normal temperature,
moisture can form inside the device and damage the electronic circuits.
Unplug the charger during lightning storms or when unused for long periods of time to avoid damage.
ASSEMBLY & INSTALLATION
1. Assembly
When you receive your Beeper electric scooters, your product is already assembled, ready to operate.
Only the reference LITE FX2L must be mounted with the tools provided in the box of your electric scooter:
Lift the scooter from its
support
Remove the covers hiding
the bolts
Unscrew the screw and
remove the axle
Place your wheel in the planned
location, the inflation valve on the
right when you are facing the
Install the axle and tighten
Add the covers hiding the bolts
Your scooter is mounted
23
scooter
the screw