Publicidad
Installation Method
EN
1. Please wear gloves when installing;
2. Do not connect the power supply before installation or
cleaning;
3. Please check whether the accessories are complete before
installation;
4. Tear off the mirror protective film after installation;
5. Do not use corrosive liquid when cleaning;
6. When touch the switch, lightly press the mirror with your
hand, do not press hard;
7. Parts List
3
Screw x4
1
4
5
6
Washer x4
2
8. Installation Diagram
06
Base x1
Gloves x2
Magnifier with Suction Cup x1
12V1A Power Cord (Length: 1.5m/4.9 ft) x1
Color temperature button
Switch button
Brightness adjustment
button
9. Back Diagram
How to Use
1. Open/Close button: click "
" to turn on or off the light;
2. Color temperature button: click the "M" button to switch between
the three colors, and the color temperature is 3000 K/4500 K/6500 K;
3. Brightness adjustment button: long press "P" key to adjust the
brightness;
4. Connect the power adapter to the interface on the back of the
mirror, and turn on the power to use;
5. This product comes with a memory function, when it is adjusted to
the favorite light, the next opening will be the last closing state.
Outer power interface
07
Publicidad
