Publicidad
Idiomas disponibles
Idiomas disponibles
• Carefully clean the dust away from around the electronic circuit located inside its box-
type housing. Carry out this operation taking maximum care not to damage any
component of the electronic circuit.
• Clean the casing using a damp cloth moistened in a solution of neutral soap and
water. After cleaning the entire surface, to rinse the soap from the casing using another
cloth moistened in water and dry using a dry cloth.
• Close the hand dryer by assembling the casing once more, tightening the screws that
fix the casing to the base and connect to the power grid.
• Start the hand dryer up 2 or 3 times in a row to ensure that all remaining dust is
extracted.
Air filter and odor-neutralizing balls:
• Replace the old filter by pulling from the lateral flaps, as shown on picutre.
• The condition of the filter must be checked periodically.
15
Publicidad
