Assembly; Attach Storage Hook; Attach High Pressure Hose To Spray Gun; Attach Spray Nozzle - Ford FPWE-F2.1 Manual Del Operador

Step 1 - Attach Wheels
Rotate and press the wheel axle in to the mating hole until the wheel snaps and locks into position and will not slide off.
Repeat process on the other side of the pressure washer to install the second wheel.
Step 2 - Attach Storage Hook
Align the holes of the storage hook to the holes in the back of the machine. Fasten the storage hook to the back of the
pressure washer using the 3 supplied screws and a Phillips screwdriver (not supplied).
Step 3 - Attach High Pressure Hose to Spray Gun
To attach the spray gun to the high pressure hose, unlock the coupler located on the spray gun by sliding it into position "A".
Attach the high pressure hose, then lock the spray gun to the high pressure hose by pushing the coupler to position "B". To
confirm the high pressure hose is locked into the spray gun, pull gently on the hose.
The hose reel is only for storing the high pressure hose. The high pressure hose must be
CAUTION!
completely removed from the storage reel each time you use this pressure washer.
B
A
Step 4 - Attach Spray Nozzle
Insert the adjustable spray nozzle into the spray gun. Turn the adjustable nozzle clockwise until it is hand tight and it locks
in place. To confirm that spray nozzle is locked into the spray gun, gently attempt to pull the two components apart. The
components should remained locked together.
D

ASSEMBLY

Storage
Hook
C
10
B
A