Microsoft Xbox 360 Wireless Racing Wheel with Force Feedback Manual De Instrucciones página 7

To move the clamp to another location, pull
the quick-release lever, loosen the screw, and
slide the clamp off the table.
  caution
Make sure that the table clamp is
secured to a fl at, stable, and solid
surface, such as a wooden table. Do not
install the clamp on a glass-top table.
    a ttachtheracingWheeltotheclamp
To attach the racing wheel to the table clamp,
angle it toward you so that the guide pins on
the clamp fi t into the corresponding sockets
on the base of the racing wheel. Take care not
to pinch your fi ngers.
Once aligned, press down on the back of the
racing wheel until it clicks into place.
  7  
To release the racing wheel from the clamp,
press the release button and lift the racing
wheel from the clamp's guide pins, back-end
fi rst.
    c onnecttoPower
To connect the racing wheel to power,
either connect the AC power supply to a
standard wall outlet, or insert batteries (sold
separately). While connected to AC power,
your racing wheel will continue to use
wireless signals for gameplay.
Connect to power by completely inserting
the power supply cord into the power input
on the back of the racing wheel until it stops,
then connect the power supply to a standard
wall outlet.
Only use the power supply unit that is shipped
with the product or given to you by an
authorized repair center.