Publicidad
Precautions
• Keep this manual in an appropriate place for future reference.
• Check the general condition of the device immediately after removing the packaging.
• Failures caused by poor installation or misuse of the device are excluded from the warranty.
• Always work with the cabin lid closed, and with appropriate protections.
• Always work with forced aspiration.
• Protect yourself adequately, use a mask, gloves and safety glasses.
• To avoid the risk of electric shock, this equipment should only be connected to a suitable grounded power source.
Before connecting the appliance, check that the identification label indicates the correct voltage. Installation must be
in accordance with all applicable safety standards.
• Remove any dirt or water from the cable connection.
• Avoid pulling, twisting or excessively bending the network connection cable.
• Do not touch the appliance or the cable with wet hands.
• Install the product away from heat sources, dust, high humidity, water splashes and flammable materials (alcohol,
solvents, etc.).
• Unplug the appliance immediately if you detect noise, odor or smoke.
• Prevent children or non-specialized personnel from manipulating the device.
• If in doubt, do not operate the device. Contact a qualified and authorized repairer.
• Do not disassemble, repair or modify the appliance beyond cleaning and maintaining filters and fuses.
• Unplug the appliance in the event of a storm and when not in use for a long time.
• Unplug the appliance before cleaning it, do not wet it directly, do not use chemicals.
• Contact your dealer for questions or detailed troubleshooting information.
• Before using the device, make sure that it is sitting on a firm and solid base.
• The cable can only be replaced by one with the same characteristics as that supplied by the manufacturer.
• Do not use the machine outside its intended use.
Technical characteristics
Height:
Width:
Length:
Weight:
Power supply:
Consumption:
Declaration of conformity UE
The firm Hager & Werken GmbH & Co KG, Ackerstr.1, 47269 Duisburg, Germany hereby declares that the product
AIRSONIC ABSORBO BOX II, REF 401105 meets the requirements set out in the following directives:
2014/35/UE (low tension)
2014/30/UE (electro magnetic compatibility)
8
300 mm
360 mm
385 mm
4.38 kg
230 V, 50/60 Hz
22 W
Publicidad
