ENGLISH
-
After installation, ensure that the kitchen hood is level to prevent grease build-up on the
end (Fig. 2).
-
The kitchen hood should be placed at a distance of 65-75 cm above the cooking surface for
best effect (Fig. 3).
-
The dimensions of the kitchen hood are shown in Figure 4.
-
The width of the kitchen hood is as follows:
02880_Bolero Flux TT 605500 Glass Black A++ > 60 cm
o
o
02845_Bolero Flux TT 605500 Glass White A++ > 60 cm
02885_ Bolero Flux TT 905500 Glass Black A++ > 90 cm
o
02886_ Bolero Flux TT 905500 Glass White A++ > 90 cm
o
-
Figure 3 shows the necessary elements to install the kitchen hood, bracket and hooks.
Fig. 5 key:
1. Internal chimney bracket
2. External chimney bracket
3. Wall hook
1. Install the wall hook in a suitable location once the installation height is set and keep it
aligned. Use screws to fix it to the wall. Fig. 6.
The screws used for the hook are ST4*40 mm countersunk star head.
The screws used for the chimney support are ST4*40 mm star head.
Legend Fig. 6:
1.- Internal chimney bracket.
2.- Wall hook.
2. Fix the outer bracket on the chimney, and make sure that the inner part of the chimney can
be adjusted to the installation height, as well as that of the extendable connection pipe.
Then, install the extendable connection pipe in the chimney of the kitchen hood and place
the hood in the bracket. Fig. 7
Legend Fig. 7:
1.- Extendable connection pipe.
2.- Internal chimney.
3.- External chimney support.
4.- External chimney.
3. Place the kitchen hood on the hook on the wall. Fig. 8
4. Fix the outer bracket with the hooks and the inner part of the chimney with two screws
(ST4*8 mm). Secure the housing with star security screws (ST4*40 mm). Fig. 9
Legend Fig. 9:
1. Safety screw
5. Plug the power cable into the outlet.
Black cable (or brown, depending on models) > Phase
Blue cable > neutral
Yellow-Green cable > ground
50
BOLERO FLUX TT 605500 GLASS BLACK A++ / WHITE A++
BOLERO FLUX TT 905500 GLASS BLACK A++ / WHITE A++