Publicidad
a
Quick start guide
Power Inverter (150 Watt)
For more information see the extended manual online:
ned.is/pim15012egy
Intended use
This product is a power inverter to convert 12 V DC to 230 V AC.
The modified sine wave power inverters are less suitable for
4
devices with a motor. Use a pure sine wave power inverter
(PIPxxxxxGY).
Only use this product in combination with class II devices.
Do not use this product with:
•
Devices that exceed the rated power of the inverter.
•
Capacitive and perceptual load devices such as air conditioning,
high power drills, fridges, microwave ovens, or blenders.
•
Devices that have strict power supply requirements, such as
precision measuring equipment.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
The product is not intended for professional use.
Main parts (image A)
1
Power socket
USB port
2
Power switch
3
Safety instructions
-
WARNING
•
Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
•
Only use the product as described in this document.
•
Do not install the product next to flammable materials.
•
Do not place the product in areas with high temperature or
direct sunlight.
•
Do not cover or obstruct the ventilation openings on the
product.
•
Do not immerse the product in water or other liquids.
•
Do not expose the product to water, rain, moisture, or high
humidity.
•
Do not operate the product close to combustible gas or open
fire.
•
Do not operate appliances that may feed power back into the
power inverter.
•
Do not open the product, there are no user serviceable parts
inside.
•
Disconnect the product from the power source before cleaning.
•
Disconnect the product from the power source before service
and when replacing parts.
•
Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
•
Do not let children play with the packaging material. Always
keep the packaging material out of the reach of children.
•
Always keep the power cable and the product away from usual
walkways.
•
Do not drop the product and avoid bumping.
•
Do not use aggressive chemical cleaning agents when cleaning
the product.
•
This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
Connecting the power inverter
Plug the 12 Volt plug A
5
into a 12 Volt power socket.
PIM15012EGY
PIM15012FGY
4
Fuse
12 Volt plug
5
Powering a socket device
-
Make sure the target device is switched off before connecting it.
1. Plug the power plug from a target device into the power socket
A
1
.
2. Set the power switch A
-
Do not load the power inverter more than 80% during long use
(>1 hour).
Powering a USB device
1. Plug a USB cable into the USB port A
2. Plug the other end of the USB cable into your target device.
3. Set the power switch A
Troubleshooting
If the target device is not receiving power, look at the indicator LEDs
and listen for alarms. The table below shows what the combinations
of lights and sounds mean.
Problem
Possible cause
The target
The power inverter
device is not
is switched off
receiving
power.
The 12 Volt power
socket is not
working.
The target device
has drawn too much
power. The fuse has
blown.
Disposal
The product is designated for separate collection at
an appropriate collection point. Do not dispose of the
product with household waste.
For more information, contact the retailer or the local
authority responsible for the waste management.
c
Kurzanleitung
Wechselrichter (150 Watt)
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/pim15012egy
Bestimmungsgemäße Verwendung
Dieses Produkt ist ein Wechselrichter zur Umwandlung von 12 V DC
in 230 V AC.
Die modifizierten Sinus-Wechselrichter sind für Geräte mit einem
4
Motor weniger geeignet. Verwenden Sie einen reinen Sinus-
Wechselrichter (PIPxxxxxGY).
Verwenden Sie dieses Produkt nur in Verbindung mit Geräten der
Klasse II.
Verwenden Sie dieses Produkt nicht mit:
•
Geräte, die die Nennleistung des Wechselrichters überschreiten.
•
Geräte mit kapazitiven und wahrnehmbaren Lasten wie
Klimaanlagen, Hochleistungsbohrmaschinen, Kühlschränke,
Mikrowellenherde oder Mixer.
•
Geräte, die strenge Anforderungen an die Stromversorgung
stellen, wie z. B. Präzisionsmessgeräte.
Das Produkt ist nur zur Verwendung innerhalb von Gebäuden
gedacht.
3
3
to ON.
2
of the power inverter.
3
to ON.
Possible solution
Switch on the power
inverter.
Try a different 12 Volt
power socket .
1. Remove the target
device from the
power socket.
2. Remove the 12 Volt
plug from the 12 Volt
power socket.
3. Replace the fuse.
-
Do not attempt to
power the same
target device again.
PIM15012EGY
PIM15012FGY
Publicidad
