Kite Optics Mono Stabilized Manual Del Usuario página 12

OBSERVATIE
- A.
- B.
- C. Activate the stabilisation system by flipping the switch (3) to ON position.
NOTE ! placing the switch (3) to ON position while no batteries are placed or
batteries are empty, will cause shaky image. This is normal.
CLEANING OF THE LENSES
Always remove large particles first, using a soft brush or by blowing them away.
Large particles such as sand and salt could cause scratches on the lens surface
during cleaning. For thorough cleaning we recommend breathing onto the lens
surface to form a coat of condensation and then cleaning it with a soft and moist
cloth. Never press hard or use force while wiping the lenses. We advise not to
use liquids ment for spectacle cleaning, unless they are advised for binoculars.
Some liquids can bring damage to the coatings of your binoculars.
STORAGE
-
-
-
-
-
WARRANTY – 2 YEARS
The warranty period of your instrument starts on the date of purchase in
accordance with the following conditions: In case of manufacturing faults or
defects in material not caused by the user, we take on material and workmanship
costs. We reserve the right to repair or replace the instrument or the defective
part at our discretion. This warranty is not valid when the defect has been
caused by improper handling of the instrument, or in case of an accident. In that
case, thanks to the excellent after-sales service of KITE Optics, the costs of
materials and workmanship wil be braught to a minimum.
andleiding_Mono_stabi.indd 12
Look through the binoculars, keeping in mind the above instructions
of first use.
Depending on the distance of the observed object, adjust focus by
turning the focus wheel (4)
The power indication light (7) turns green.
Store your optics in a dry and well ventilated place.
When the instrument is wet or moist, dry it immediately.
Do not store in a location with dramatic temperature changes.
Do not store near heat sources or in high temperature environments.
If the product is not used for an extended period,
remove the batteries from it.
Do not place a heavy load on top of this product when storing it.
It may cause the product to fail.
8/10/2019 15:13:53