Descargar Imprimir esta página

EUFY BodySense T9140 Manual Del Usuario página 5

Ocultar thumbs Ver también para BodySense T9140:

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Weight-Only Measurement
This scale can also be used as a conventional weight-reading scale. You can simply step on
the scale to measure your current weight without opening the EufyLife app.
Maintenance
Regularly clean the scale with a dry or slightly dampened soft cloth.
- Do not wash the scale with water or immerse it in water.
- Never use detergents to clean the scale as this may cause it to malfunction
or discolor.
Troubleshooting
Error Message
Error Display
Description
Overload. The device will power off.
Low battery. The device will
power off.
Measurement failure.
06
Solution
Stop using this scale for
measurement.
Replace all four batteries at the same
time.
• Step barefoot and keep full contact
with the electrodes.
• Stand still until the measurement on
the LED display locks.
When Measuring
Issue
Cause
Abnormal measurement
• Incorrect posture.
results:
• Too high
• Device is placed on soft
carpeting or uneven
• Too low
surface.
• Huge difference
between two recent
• Feet are too dry.
measurements
• Batteries not installed.
LED display does not
turn on after stepping
• Worn batteries.
onto the scale.
Scale does not proceed
• Taking a measurement
to analyse body
while wearing shoes or
composition.
socks.
Specifications
Product Model
T9140
Power Source
6 V (4 × AAA batteries)
LED Display
3.1 × 1.3 in / 80 × 32 mm
Measurement Units
Pound / Stone / Kilogram
Unit Increments
0.1 lb / 0.1 kg
Body Fat Unit Increments
0.1 %
Body Water Unit Increments
0.1 %
Muscle Mass Unit Increments
0.1 %
Measurement Range
11lb - 397lb / 0st 11lb - 28st 5lb / 5kg - 180kg
Temperature: 10 - 40 °C
Working Environment
Humidity: 20 - 90% RH
Temperature: -10 - 50 °C
Storage Environment
Humidity: <= 90% RH
Dimension
12 × 12 × 1 in / 300 × 300 × 26 mm
Net Weight
3.67 lb / 1. 66 kg
English
Solution
Step onto the scale barefoot and
stand still.
Place the device on a hard and flat
surface.
Wipe your feet with a damp cloth,
keeping them slightly damp.
• Install four new batteries.
• Replace all four batteries at the
same time.
• Stand barefoot on the scale and
keep feet in full contact with
the electrodes when taking a
measurement.
07

Publicidad

loading