Publicidad
Idiomas disponibles
Idiomas disponibles
BREAKER
DCH911
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No‑Load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Wireless Tool Control Transmitter
Frequency Band
Max. Power (EIRP)
Weight (without battery)
Noise values and/or vibration values (triax vector sum) according to
EN IEC 62841‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a
h,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN IEC 62841‑2‑6 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over
the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
DCH911
V
DC
bpm
1350–1620
J
SDS max®
MHz
mW
kg
dB(A)
dB(A)
dB(A)
=
m/s
2
m/s
2
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
Breaker
DCH911
54
D
WALT declares that these products described under
1
e
Technical Data are in compliance with: 2006/42/EC,
Li‑Ion
EN62841‑1:2015 +A11:2022, EN IEC 62841‑2‑6:2020 +A11:2020.
These products also comply with Directive 2014/53/EU and
27
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
12
2000/14/EC, Electrical concrete breaker (hand‑held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D‑90431
Nürnberg, Germany, Notified Body ID No.: 0197
433
Level of sound power according to 2000/14/EC (Article 12,
0.03
Annex III, No. 10; m ≤ 15 kg):
12.3
L
(measured sound power level)
WA
L
(guaranteed sound power level)
WA
The undersigned is responsible for compilation of the
89
technical file and makes this declaration on behalf of D
97
3
Markus Rompel
6.0
Vice President of Engineering, PTE‑Europe
1.5
D
WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
07.05.2023
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008 AND THE RADIO
EQUIPMENT REGULATION 2017
D
WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015 +A11:2022, EN IEC 62841‑2‑6:2020 +A11:2020.
These products conform to the following UK Regulations:
WALT at
e
Breaker
DCH911
EnGLIsh
97.5 dB
105 dB
WALT.
e
27
Publicidad
