Publicidad
Idiomas disponibles
Idiomas disponibles
11 CLEANING AND MAINTENANCE
11.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
12 TECHNICAL DETAILS
Chuck
Power supply
Gear Train
Rotation speed
Impact rate
Clutch
Torque
13 NOISE
Noise emission values measured according to relevant standard. (K=5)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2021 VARO
POWDP15210
13 mm keyless
20 Volt DC
2 Speed
0-450/0-1800 min-1
0-7200/0-28800 bpm
23+1+1 Positions
50Nm (MAX.)
76 dB(A)
87 dB(A)
Max 6,7 m/s²
P a g e
| 12
K = 1,5 m/s²
www.varo.com
EN
Publicidad
