Publicidad
Idiomas disponibles
Idiomas disponibles
Rear Panel
Installation Steps
1.
Please install your network cards first before the Router
2.
Screw-in the antenna (clockwise) into the Antenna connector
3.
Connect the power, LAN cable and ADSL cable to the back
4.
Use your wireless card to do a site survey, the default ADSL SSID is "airlive" and Channel is
"6"
5.
If you need to change router configuration, please follow the procedure below:
English
4
The Router default IP address is 192.168.2.1. Please make sure your computer
IP is in the same subnet as the AP (i.e. 192.168.2.x)
Open the web browser and enter 192.168.2.1. When asked for Login and
Password, just type admin for login name and airlive for Password.
WT-2000ARM
Publicidad
