Publicidad
Idiomas disponibles
Idiomas disponibles
Charging the battery
Prior to using the unit for the first time, fully charge the built-in battery. Plug de DC connector of the supplied
mains adaptor into the input socket (5) on top of the unit and the other end into an appropriate mains outlet.
The built-in battery will start charging, no matter if the speaker is on or off. On the display, the battery charging
symbol will run from 1 to 3 cells.
Once the battery is fully charged, it will display steadily 3 cells
Description of Top Panel
1. USB input: Dual function- Play or Charge USB
device
2. TF card input
3. AUX/LINE input
4. MIC input
5. DC input to power/charge the speaker
6. ON/OFF switch
7. : In BT/USB/TF mode: press shortly =Pre-
vious song
In AUX mode, this button has no function
8. Play/pause: In USB/TF/BT mode this but-
ton has the Play/Pause function
In AUX mode, this button has no function
9. : In BT/USB/TF mode: press shortly = Next
song;
In AUX mode: no function
10. MODE switch to select among LINE/BT/USB/TF
mode.
11. Repeat button
12. REC button: press you record your voice on
USB or TF
13. Press to cycle through 3 light effect modes and switch the LED illumination on and off
14. MENU button: details see below
15. Volume control
16. LED display
MENU button (14)
This button allows to make various adjustments in conjunction with the VOLUME control (15). Press the MENU
button:
• If b is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the sound output
• If MU is displayed, rotate the VOLUME control (15) to adjust the microphone volume
• If EC is displayed, rotate the VOLUME control (15) to adjust the echo effect of the microphone
• If Mb is displayed, rotate the VOLUME control (15) to adjust the low frequencies of the microphone
• If Mt is displayed, rotate the VOLUME control (15) to adjust the high frequencies of the sound output
• If U is displayed, rotate the VOLUME control (15) to adjust the overall volume of the sound output. You can
adjust the overall volume also directly any time by rotating the VOLUME wheel (15)
INSTRUCTIONS OF USE
• Press the ON/OFF button to switch the unit on.
• Press MODE button to select LINE/BT/USB/TF.
• Press MODE button and it will enter LINE (AUX) mode. Use an audio cable to connect the "AUX input" of the
speaker to reproduce music from other devices.
• Press MODE button to enter BT mode. Previously pair the chosen device to the speaker. Once they have been
paired successfully you can sit back and enjoy the music. Regulate the volume with the help of the volume
knob.
MANUAL - LYRA400
www.ibiza-light.com
1
2
3
Play & Charge
USB
Micro-SD
AUX
11
REPEAT
12
REC
13
LIGHT
14
MENU
4
6
5
MIC IN
DC IN
OFF/ON
PREV
15
VOLUME
+
NEXT
MODE
16
7
8
9
10
3
Publicidad
