EN
INSTALLATION
The appliance must only be used and installed in a fixed position.
The installation must be carried out by a qualified electrician to avoid any danger.
- IMPORTANT! Make sure that there is no electrical wiring or other installation
(water pipe for example) near the locations where the holes will be drilled. Be
sure to fix the unit vertically and firmly to the wall.
- This appliance is intended for indoor installation and use only.
- The appliance should not be placed directly below a power outlet.
- Respect the minimum distances between the appliance and the walls, the
floor, furniture, curtains, etc.
1. Be sure to keep the distance between the heater and floor, wall and so on at least 30cm.
2. Don't use in bathroom and don't cover.
3. Follow drill dimension to drill top two holes(Φ8) on the wall and put the expansion screws in the holes.
Model
Ceramic AC 1000 Ceramic AC1500 Ceramic AC 1800
M (mm)
228
378
378
13