Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
The suction power
of the product is
reduced
Battery is not
charging
Abnormal motor
noise
Roller brush does
not turn/floor
brush light does
not turn on/roller
brush blockage
light is on
Battery indicator is
flashing
Automatic mode
does not work
Possible cause
1. The dust fills the
dustbin up to the MAX
line
2. The roller brush is
blocked by objects such
as hair
3. HEPA is dirty or
missing
1. The power outlet is
damaged
2. The power adapt-
er/charging port is not
properly inserted into
the charging port of
the socket/rack
3. The original power
adapter is not used
4. Overheating
protection
Pipe is blocked
Roller brush is blocked
by objects such as hair
Insufficient battery
power
Dust detection sensor
is clogged/dirty
17
Solution
1. Clean the dustbin on time
2. Clean the roller brush on
time
3. Clean HEPA in time or use it
after HEPA installation
1. Replace the power outlet
2. Insert the power adapt-
er/charging port into the
charging port of the
socket/rack correctly
3. Use the original power
adapter to charge the appli-
ance
4. Wait for a few minutes until
the appliance cools down
before charging/usingbefore
Clean the pipe in time
Clean roller brush in time and
restart the machine
Charge the appliance in time
Clean the trash/dirt from the
dustbin port in time
Publicidad
